Working Voltage: 220 Power: 60W.
Sunshine 30V 5A DC Power Supply P-3005A Digital Programmable Adjustable 4 Bits Digital Accurate display Laboratory Power Supply Sunshine 30V 5A DC Power Supply P-3005A Digital Programmable Adjustable 4 Bits Digital Accurate display Laboratory Power Supply Primary Technical Parameter: 1.Rated working condition Supply voltage AC220V ±10% frequency (50hz ) Working condition Temperature -10°C-40°C,relative humility≤90% Storage condition Temperature -10°C-40°C,relative humility≤80% 2.Output Voltage 0-30V Current 0-5A rotection types circuit protection,overload and over high temperature protection. Features: 1. The 5A adjustable dc power supply is with high quality and high power transformer, the machine power is enough, can really achieve the voltage output 30V, current output 5A, and can accurately set the protection current size. 2.4 bit accurate control and display, bring more precise control, and constant pressure flow protection mode, effective protection of the safety of the load. 3. The whole process circuit after the factory more than 10 years of continuous improvement and innovation, precise control, mature technology, high safety, stable and reliable by users at home and broad is certainly. 4 built-in temperature control protection circuit, when the machine internal heating temperature of over 40 degrees, the cooling fan will automatically run, when the power is connected to load more than the maximum load of the machine will automatically protect, stop output, effectively protect the use of power supply safety, extended service life.
QUICK 706W+ Digital Display Hot Air Gun + Soldering Iron Anti-static Temperature Lead-free Rework Station 2 in 1 With 3 Nozzles (1) the use of imported snails brushless motor, long life, low noise, soft wind (2) air guns equipped with sensitive sensors, used with that, that put stocks last (3) the temperature and air volume stepless adjustable sensor closed loop temperature control, temperature stability, free from the influence of wind (4) small volume duplex design, occupies a small work table, especially for lead-free board demolition, repair welding (5) This product is the original crack, a single digital, using digital air gun, soldering iron by using rotating. Iron Power consumption: 50W Temperature range: 200--480 degrees Air Gun Power consumption: 580W Stream Type: straight wind Gas flow rate: 10L/ min (maximum) Temperature display mode: LED digital display (resolution 1 degree) Temperature adjustment range: 100--450 degrees Nozzles3mm 6mm 8.5mmm Applicable Use: 1. For desoldering various elements, such as: SOIC CHIP QFP PLCC BGA etc. 2. Except for the heat-shrinkable paint drying adhesive removal thawed Preheat plastic welding Package: 1*706w+2 in 1 rework station 1*original soldering iron tips 1*adapter for your country 1*vetus tweezers 1*brush 1*user manual
QUICK 2008 Hot Air Gun Rework station Back to Home | QUICK 2008 Hot Air Gun Rework station QUICK 2008 Hot Air Gun Rework station Press tab to enlarge €--,-- Make a choice: * By default Add to compare list John: 8719122740153 Available: In stock Dispatch Free delivery Ordered today, delivered tomorrow 1 24 hour delivery time and free shipping Your repair partner, best quality and service Quick return Share this product Information QUICK 2008 hot air gun rework station The description Hot air gun rework station - 2008 is suitable for a variety of components, such as: SOIC, CHIP, QFP, PLCC, BGA (especially suitable for mobile phone line and desoldering line in row); Used for heat shrink, drying, in addition to painting, in addition to glue, thawing, preheating, soldering, etc. Features ●Model: Quick 2008 ● Voltage: 110V or 220V to choose from ● Plug types: US plug, EU plug, UK plug. ● Gross weight: 3 kg ● Power consumption: 700 W ● Sound level: less than 45db ● Gas flow: 20-100 120 liters/minute. ● Airflow type: soft wind brushless fan ● Temperature control range: 100°C - 500°C ● Category: microcomputer LED digital display ● Length of the handle component: 120 cm ● Display form: digital LED (resolution 1°C) Features of 2008 hot air gun rework station ● This small size heat gun soldering rework soldering station is made of metal alloy, which makes it durable and space-saving. ● High power and fast heating. The temperature can be adjusted conveniently, and the temperature is accurate and stable, and is not affected by airflow. ● Stepless airflow adjustment with wide range. The temperature can be easily adjusted. ● The sensitive electromagnetic inductor in the handle ensures that the unit starts working immediately as long as the handle is held. When the handle is placed on the bracket, the system will return to standby mode. Easy to use. ● The automatic cooling system can increase the life of the heating element and protect the unit. ● The compact unit takes up little space on the workbench. ● With a long life brushless blower and the noise is low. ● Digital display temperature accuracy is up to +_1°. The sensor closes the loop, the zero crossing triggers the microcomputer temperature control, LED display, large power, heating is fast, accurate and stable temperature, not affected by air volume, truly lead-free desoldering.