18650 Li-ion Lithium Battery Charger Protection Board BMS
30A
CA-6928 Module 5V Bluetooth Audio Module Bluetooth Power Amplifier Board 5.0BT ultra Small Audio Speaker Receive
Type-C Nano With the bootloader compatible Nano 3.0 controller for arduino CH340 USB driver 16Mhz Nano v3.0 ATMEGA328P
USB Programmer Condition: New Support 24EEPROM and 25 SPI flash 8pin/16pin chip USB to TTL port, can getroot online Recognize 25 series chip automatically And support download STC series procedure of singlechip With 24/25 status indicator lamp SPI pin to support expanding the utility Provide 5V-3.3V power supply output
متوافق مع جميع انواع المبرمجات حجم الايسي 6X8 mm
MT3608 Micro DC-DC Step Up Converter Booster Power Supply Module Boost Step-up Board In Put 2 Volt to 24 Volt output 5 Volt to 28 Volt MAX output 28V 2A
Oview The CP21 12 highly integrated USB to SMBus bridge controller integrates a USB2.0 full-speed functional controller, USB transceiver oscillator and 8 GPI0 pins. All customization and configuration options can be selected through a simple GUI-based configurator. Standard HID devices do not need to develop complex firmware and drivers. CP2112 devices can achieve fast USB connection with minimal development work. Product details ●USB bus power supply 4.0V to 5.25V; Self-powered 3.0V to 3.6V, I/O voltage 1.8V to VDD ●Working environment temperature: -40°C~85°C ●On-chip power-on reset circuit, on-chip voltage regulator: 3.45V output ●Comply with USB specification 2.0 standard; full speed (12Mbps) ●Support USB suspend state through SUSPEND and / SUSPEND pins, integrated 194 bytes-secondary programmable ROM, used to store customizable product information ●512 bytes SMBus data buffer, configurable clock speed device address 7-bit value CP212 slave device address ●Windows, Mac and Linux HID to SMBus library API for rapid application development, open access interface specifications ●8 GPI0 can be configured as input/output and open-drain/push-pull, configurable clock for external devices ●Output 48MHz to 94kHz, switch L ED during reading/writing SMBus ●Module size: 29.5mm*21.3mm, with two M3 mounting holes, one MicroUSB female 0
CP2102 USB to UART Converter 3.3V DTR RXI TX0 GND 5V Description: The USB converter to Serial CP2102 is useful for communicating between a 3.3 V or 5V micro controller and your computer. The USB converter to Serial CP2102 is useful for communicating between a 3.3 V or 5V micro controller and your computer. Specifications: Integrated circuit CP2102; Logic levels: 3.3 V and 5 V; Baud rates supported:5 V output (maximum 500 mA); 300, 600, 1200, 1800, 2400, 4200, 4200, 4200, 4200, 4200, 4200, 4000, 4000, 460800, 500000, 576000, 921600; 5 V output (maximum 500 mA); 3.3 V output; Integrated LEDs indicating data reception / sending Instructions for use 1. Install the CP210x driver. Before using the product, you need to install the CP2102 driver on your computer. 2. Make the hardware connections. Before making the hardware connections, turn off the expansion card and disconnect the converter from the PC. Also disconnect all sensors attached to the development board. The converter is capable of feeding the development board to be programmed. (max 500 mA). Connect the 3.3V pin to the development board power supply pin if it is running at 3.3V. Otherwise, connect the 5V pin to the power pin
CH9102 Chip USB to TTL (Serial) Converter About this item Type: USB to TTL Model: CP2102 Baud Rate: 50bps~4Mbps System Support: windows vista / XP / server 2003/200, Mac OS-X/OS-9, Linux Input Voltage: 3.3V-5V Pin Number: 5 Pin Temperature: -40℃to +85℃ Color: Red Size:41mm x 15mm
عمر افتراضي ازيد 35% من الانواع الاخرى
IGBT 40A , 600V اصلي (جديد)
0010
Specification: 1.Input Voltage:DC 4.5-24V 2.Output Voltage:integration adjustable and fixed output,back side can choose fiexd output voltage 3.Adjustable Range:0.8-17V,fixed voltage (1.8V 2.5V 3.3V 5V 9V 12V) 4.Output Current:3A (max),actual testing input 12V output 1.5A 5.Transform Efficiency:97.5%(max) (6.5 to 5V 0.7A) 6.Switch Frequency:500KHz 7.Output Ripple Wave:20mV (12V to 5V 3A) 20m band width 8.Operating Voltage:-40 Celsius-85 Celsius 9.Output Overvoltage Protection:no 10.Static Current:0.85MA 11.Load Adjust Rate:±1% 12.Voltage Adjust Rate:±0.5% 13.Dynamic Response Speed:5% 200uS 14.Output Short Circuit Protection:yes 15.Input Transposition Protection:no 16.Enable Control:yes 17.Connecting Type:soldering 18.Input Way:soldering 19.Output Way:soldering/pin 20.Soldering Hole Space:2.54mm
CP2102 USB to UART Converter DTR 3.3V RXI TX0 GND 5V Description: The USB converter to Serial CP2102 is useful for communicating between a 3.3 V or 5V micro controller and your computer. The USB converter to Serial CP2102 is useful for communicating between a 3.3 V or 5V micro controller and your computer. Specifications: Integrated circuit CP2102; Logic levels: 3.3 V and 5 V; Baud rates supported:5 V output (maximum 500 mA); 300, 600, 1200, 1800, 2400, 4200, 4200, 4200, 4200, 4200, 4200, 4000, 4000, 460800, 500000, 576000, 921600; 5 V output (maximum 500 mA); 3.3 V output; Integrated LEDs indicating data reception / sending Instructions for use 1. Install the CP210x driver. Before using the product, you need to install the CP2102 driver on your computer. 2. Make the hardware connections. Before making the hardware connections, turn off the expansion card and disconnect the converter from the PC. Also disconnect all sensors attached to the development board. The converter is capable of feeding the development board to be programmed. (max 500 mA). Connect the 3.3V pin to the development board power supply pin if it is running at 3.3V. Otherwise, connect the 5V pin to the power pin
60W
winbond 8MP ( Brand new )
30 سنتيمتر Forward Direction pin 32 / 1.0mm / 30cm
سوكت 8 رجل ضيق .. لبرمجة الايسيهات 8 رجل متوافق مع جميع انواع المبرمجات يسعدنا تلقي رسائلكم عبر الوتساب فى حالة عدم رضاكم عن المنتج او وجود خلل نستقبل رسائلكم بالسلب على اي منتج لتحسين خدمتنا